{"id":1189,"date":"2012-12-28T20:52:27","date_gmt":"2012-12-28T20:52:27","guid":{"rendered":"http:\/\/hartzellprop.com\/\/?page_id=1189"},"modified":"2021-07-21T14:46:44","modified_gmt":"2021-07-21T18:46:44","slug":"mirage-matrix-3-blade-composite-no-de-ice","status":"publish","type":"page","link":"https:\/\/hartzellprop.com\/products\/top-prop\/piper\/mirage-matrix-3-blade-composite-no-de-ice\/","title":{"rendered":"Piper PA46-350P Mirage; PA46R-350T Matrix"},"content":{"rendered":"

Piper PA46-350P Mirage; PA46R-350T Matrix<\/h1>\n

Manufacturer:<\/strong> Piper
\nAircraft Model(s):<\/strong> PA-46-350P Mirage, PA46R-350T Matrix
\nApplicable Engines:<\/strong> TSIO-540-AE2A<\/p>\n

PDF: Mirage,\u00a0 Matrix 3-Blade Composite<\/a><\/strong><\/p>\n

Base Kit Includes:<\/h2>\n\n\n\n\n\n\n
QTY<\/strong><\/td>\nDESCRIPTION<\/strong><\/td>\nITEM #<\/strong><\/td>\n<\/tr>\n
1<\/td>\n3-Bladed Propeller<\/td>\nHC-I3Y1R-1N\/N7605C( )+2<\/td>\n<\/tr>\n
1<\/td>\nPolished Spinner<\/td>\nD-6750-1P<\/td>\n<\/tr>\n
1<\/td>\nSTC Document Set<\/td>\nSA02677CH-D<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Options:<\/h2>\n\n\n\n\n\n\n
DESCRIPTION<\/strong><\/td>\nITEM #<\/strong><\/td>\nNOTES<\/strong><\/td>\n<\/tr>\n
Propeller De-ice Kit<\/td>\n102960-1<\/td>\nFor all de-iced aircraft<\/td>\n<\/tr>\n
Airframe De-ice Kit<\/td>\n102960-2<\/td>\nNot required when replacing Hartzell TC’d 3-blade composite<\/td>\n<\/tr>\n
Airframe Electrical Kit<\/td>\nE7359-1<\/td>\nNot required when replacing Hartzell TC’d 3-blade composite<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Applicable Models:<\/strong>
\nPA-46-350P Mirage, s\/n 4622001 to 4622200, 4636001 and after; PA46R-350T Matrix<\/p>\n

Specifications:<\/strong>
\n80-inch diameter 3-bladed light weight aluminum hub propeller
\nNext Generation Advanced Structural Composite (ASC II) blades
\n2400 hour \/ 6 year TBO
\n64.0 pounds (propeller and spinner)<\/p>\n

Replaces:<\/strong>
\nHartzell HC-I2YR-1BF\/F8074K- 80 inch dia. 2-bladed prop
\n2000 hour \/ 5 year TBO
\n63.5 pounds (propeller and spinner)<\/p>\n

Hartzell HC-I3YR-1E\/7890K- 80 inch dia. 3-bladed prop
\n2400 hour \/ 6 year TBO
\n75.4 pounds (propeller and spinner)<\/p>\n

Advantages:<\/strong>
\nLighter weight
\nBetter take-off and climb performance
\nLower noise
\nImproved appearance
\nSmoother operation
\nLonger TBO<\/p>\n

Notes:<\/strong>
\nInstallation kits assume that the above Hartzell 2-blade or 3-blade propeller was installed per the original type certificate data sheet (TCDS) or STC SA1340CH. If any other propeller has been installed, the aircraft must be returned to the original TC’ed configuration before installing this STC.
\n-Approximately 40 hours of labor are required to install this STC kit (Approximately 30 hours are required when installed in conjunction with an annual inspection). See order info note below.
\n-Approximately 2-3 hours installation time should be expected when replacing the Hartzell 3-blade, HC-I3YR-1E\/7890K.<\/p>\n

Wire is not included with the kit. The following wire is required when replacing the 2-blade Hartzell and must be purchased seperately:
\nM22759\/7-14 Qty. 30 ft.
\nM22759\/7-16 Qty. 2 ft.
\nM22759\/7-18 Qty. 6 ft.
\nM22759\/7-20 Qty. 10 ft.
\nSupplier for the wire: Astro Wire & Cable
\n(800) 543-5810<\/p>\n

Also, auxiliary cabin heat is interlocked with the propeller de-ice system, therefore auxiliary cabin heat is inoperative when propeller heat is turned on.<\/p>\n

Interested in more information? Fill out the form below and we’ll contact you shortly.
\n